Rapid AI Architect Studio
Rapid CADFloor 1Canvas-first mode active
0 drawingsCurrent project: Unassigned
Canvas-first drafting lane
Review surfaces stay tucked away until you need a release or readiness checkpoint.
No active selectionPress `/` to focus Bob
Canvas
Ready
Project: UnassignedDrawing: Floor 1Autosave ready
MEP BIM Routing + Sheets (Phase 216)
HoldNodes: 4
Segments: 2
Sheets: 1
Coverage: 21%
Missing core types: fixtures, equipment, ducts, pipes, vents, terminals, fittings, fire_protection, controls, ifc_flow_segment, ifc_pipe_segment
GROUNDED_ENDPOINThold
Segment depends on inferred or missing endpoints.
CLEARANCEhold
Clearance could not be measured because floor wall geometry is missing.
MAX_LENGTHpass
Length 67.2" within 360" max.
ORTHOGONALpass
Segment is orthogonal.
GROUNDED_ENDPOINThold
Segment depends on inferred or missing endpoints.
CLEARANCEhold
Clearance could not be measured because floor wall geometry is missing.
• No fixtures were recovered from explicit fixture blocks or wet-room inference.
• Equipment does not contain source-backed HVAC and plumbing anchors.
• Duct routing includes inferred or blocked segments.
• No routed pipes were generated.
• Vent terminals exist without routed vent segments.
• Terminal set includes inferred nodes.
• Fitting set includes inferred fittings.
• No fire protection objects were recovered from supported explicit blocks.
• Equipment does not contain source-backed controls metadata.
• Segment mep_seg_hvac_duct_mep_jn_1_hvac_mep_vent_1_fallback_mep_eq_1_air_handler_mep_eq_1_air_handler (duct) depends on inferred endpoints and is not routing-safe.
• Segment mep_seg_hvac_duct_mep_jn_1_hvac_mep_vent_1_fallback_mep_eq_1_air_handler_mep_eq_1_air_handler (duct) has no measurable wall graph for clearance validation.
• Segment mep_seg_hvac_duct_mep_vent_1_fallback_mep_jn_1_hvac_mep_vent_1_fallback_mep_eq_1_air_handler (duct) depends on inferred endpoints and is not routing-safe.
• Segment mep_seg_hvac_duct_mep_vent_1_fallback_mep_jn_1_hvac_mep_vent_1_fallback_mep_eq_1_air_handler (duct) has no measurable wall graph for clearance validation.
• Routing graph is missing required plumbing pipe segments.
• Routing graph is missing required vent segments.
• Routing graph is missing required fire protection pipe segments.
• IFC flow mapping is missing IfcFlowSegment.
• IFC flow mapping is missing IfcPipeSegment.
• IFC flow mapping still includes inferred graph elements and is not export-safe.
• IFC flow mapping is not coordinated because these trade lanes are not grounded: fixtures, equipment, ducts, pipes, vents, terminals, fittings, fire_protection, controls.
• Floor 1 includes inferred equipment tags.
• MEP sheets cannot be treated as coordinated while fire protection truth is not grounded.
• MEP sheets cannot be treated as coordinated while controls truth is not grounded.
• MEP coverage is missing core types: fixtures, equipment, ducts, pipes, vents, terminals, fittings, fire_protection, controls, ifc_flow_segment, ifc_pipe_segment.
• MEP coverage is 21.43%, below the 90% threshold.
Canvas Type: 2DFloor 1BIM Sheets: Hold
Tool Tray
Manual drafting
Blank Canvas
Start with Bob or draft by hand.
This workspace now opens blank on purpose. Give Bob a command like “set up Floor 1 for a two-story brick house” or use the tools to begin manually.